Section 1 specifications – Hach-Lange FP 360 sc User Manual User Manual
Page 5

5
Section 1
Specifications
Specifications are subject to change without notice.
Measurement
Measurement method
UV fluorescent measurement process for polycyclic aromatic
Hydrocarbons (PAH)
Excitation wavelength: 254 nm
Emission (measurement) wavelength: 360 nm
Measuring range
Low measurement range
0 to 50 ppb and 0 to 500 ppb in relation to PAH calibration standard,
corresponding to 0.1 to 1.5 ppm and 0.1 to 15 ppm of oil calibration
standard
High measurement range
0 to 500 ppb and 0 to 5000 ppb in relation to PAH calibration standard,
corresponding to 0.1 to 15 ppm and 0.1 to 150 ppm of oil calibration
standard
Display units
ppb, ppm, μg/L, mg/L
Reproducibility
2.5% of measurement value at a constant temperature
Measurement accuracy
5% of measurement value ±2% from measurement range limit
at a constant temperature
Limit of detection
1.2 ppb (PAH)
Response time
10 s (T90)
Calibration
Factory calibration with UV fluorescence calibration standard, custom
adaptation possible
Sensor software
Software version
From 1.14
Equipment properties
Weight
Measurement sensor
Stainless steel version 2.8 kg, titanium version 1.8 kg
Flow cell
Approximately 0.6 kg, including installation board approximately 2.0 kg
Pressure range
Sensor
Max. 30 bar
Flow cell
Max. 1 bar
Dimensions
Measurement sensor
(Ш Ч length)
68 mm x 306 mm (2.68 in. x 12.05 in.)
(without plugs or suspension pin)
68 mm x 399 mm (2.68 in. x 15.71 in.) (including suspension pin)
68 mm x 413 mm (2.68 in. x 16.26 in.)
(with additional cleaning option)
Flow cell (L × W × D)
98 mm x 98 mm x 150 mm (3.86 in. x 3.86 in. x 5.91 in.) (without
fittings),
installation board: 600 x 300 x 10 mm (23.62 in. x 11.81 in. x 0.39 in.)
Materials
Measurement sensor
Housing: stainless steel 1.4571 or titanium
Optic bracket: POM
Housing bolts: stainless steel 1.4571
Measurement window: synthetic quartz glass (Suprasil)
Gaskets (housing): Viton
Gaskets (measurement window): NBR (Nitrile Butadiene Rubber)
Flow cell
Housing: POM
Installation board: PVC
Gaskets: NBR (Nitrile Butadiene Rubber)
Fittings: nickel-plated brass
Shackle
Stainless steel 1.4301