5 output options, Operation, 2 hold/transfer outputs – Hach-Lange SC 100 User Manual

Page 34: 1 navigating to the output options menu

Output Options
30

Operation

4.5 Output Options

Refer to the

System Setup on page 27

for more information on the output options menu.

The analyzer provides two isolated analog outputs (Output 1 and Output 2).

4.5.2 Hold/Transfer Outputs

During normal measurement operation, the analog outputs can be held at the last measured value
or transferred to a preset value. To hold or transfer the output until released:

4.5.1 Navigating to the Output Options Menu

Step

Select

Menu Level/Instructions

Confirm

MAIN MENU

—

SYSTEM SETUP

OUTPUT SETUP

SELECT OUTPUT

Customize the options, refer to

System Setup on page 27

Main Menu or Main Measurement Screen when Output options are configured.

—

Step

Select

Menu Level/Instructions

Confirm

MAIN MENU

—

TEST/MAINT

HOLD OUTPUTS

SET OUTMODE

Select HOLD OUTPUTS or XFER OUTPUTS

SET CHANNELS

Select ALL or one of the connected sensors.

—

ACTIVATION

Select LAUNCH

Main Menu or Main Measurement Screen

reading will

flash