Clear-Com Tempest900 User Manual
Tempest, Channel quickstart, Guide
What’s in the box
BaseStation
•
CM-922 series BaseStation
●
Power Cord
●
Omni-directional whip antenna
●
3.5mm to 3.5mm 3 conductor data pairing cable
» Used to pair a BaseStation to the BeltStation(s)
●
USB-A to USB-B cable
» Used to update BaseStation firmware
●
USB-A to Mini-USB
» Used to update BeltStation firmware
●
BaseSync cable
» Used if you have more than one BaseStation
●
Improves RF performance when using multiple systems
●
CD with manual, T-Desk software
BeltStation
●
CP-922 series BeltStation
●
Li-Poly rechargeable battery
●
5VDC wall charger with Mini USB connector
Remote Transceiver (optional)
●
Remote RF transceiver
●
RJ-45 to RJ-45 CAT-5 cable
●
Omni-directional whip antenna
●
Mounting Plate and screws
5 Bay Battery Charger (optional)
●
Battery Charger
●
AC Cable
Note: Charge ALL BeltStation batteries prior to set-up.
What else you may need
●
Headset, one for each user; May be dynamic or electret
microphone, with a 4-PIN XLR female connector
●
3-PIN XLR cables to connect to external 2-Wire Intercom
system
●
RJ-45 cables to connect to external 4-Wire Intercom
system
●
RJ-45 cable to connect to PC for T-Desk LAN control
Tempest
®
900
810529Z Rev B 17 April 2012
2-Channel QuickStart
Guide