Clear-Com GPI-6 - Manual (Page 8)

Vitec Group Communications
GPI-6 Interface Instruction Manual
1 - 2
The front panel of the GPI-6 has six green LEDs to indicate the
presence of an input signal on a given channel. A seventh yellow LED
indicates that the module is communicating with the matrix. There is
also a TEST pushbutton switch for each input to allow local activation
of the software function in the matrix that the input is controlling.
OPERATION
Once the GPI-6 is installed and configured there are no controls for
day-to-day operation. Activation of each individual input is indicated by
LEDs.
The TEST switches for each input can be used to test the software
function associated with the input.
The yellow LED should be 'on' all of the time indicating that the frame
is communicating with the module.
CONFIGURATION
You configure the inputs with the Eclipse Configuration System (ECS)
programming software. Refer to the Eclipse Configuration System
Manual for more information.