Clear-Com KB-702GM - Manual (Page 17)

K B - 7 0 2 / K B - 7 0 2 G M T W O - C H A N N E L
2 - 1
INSTALLATION
1. Unpack the unit and inspect for any damage that may have occurred in
shipping.
2. Set the option switches to the default (up) position.
3. Connect the intercom lines. If only one intercom line is to be connected,
turn option switch #1 to the on or closed position.
4. Install the KB-702 into the four-gang outlet box or V-box. (For additional
information, refer to the Clear-Com System Installation Manual.)
5. Set listen levels and sidetones. (Refer to the listen level and sidetone
setting topics in the Operation chapter of this manual.)
6. The speaker station should now be operating properly.
7. Read the rest of this manual for further information.