Installation, Installation -1 – Clear-Com HB-704 User Manual
Page 13
H B - 7 0 2 / H B - 7 0 4 T w o - a n d F o u r - C h a n n e l
2 - 1
INSTALLATION
1. Unpack the unit and inspect for any damage that may have occurred
during shipping.
2. Connect the intercom lines. If less than the maximum number of intercom
lines are to be connected, link unused intercom inputs to a connected
input with jumper wires.
3. Install the HB-702 or HB-704 into the two-gang outlet box.
For additional information, refer to the Clear-Com System
Installation Manual.
4. Connect the appropriate headset or handset.
5. Set listen levels and sidetones.
Refer to the listen level and sidetone setting topics in the Operation sec-
tion of this manual.
6. The headset station should now be operating properly.
7. Read the rest of this manual for further information.