CAME Ver U4512-B Kit - Manual (Page 22)

22
ENGLISH
T
h
e d
at
a a
n
d i
n
fo
rm
at
io
n r
ep
o
rt
ed
i
n
t
h
is
i
n
st
al
la
ti
o
n
m
an
u
al
a
re s
u
sc
ep
ti
b
le to c
h
an
g
e a
t a
n
y t
im
e a
n
d w
it
h
o
u
t o
b
li
g
at
io
n
o
n
C
AM
E c
an
ce
ll
i a
u
to
m
at
ic
i s
.p
.a
. to n
o
ti
fy
u
se
rs
.
9.2 What to do when....
9.1 Periodic maintenance
The unit does not require specific maintenance.
Only as a precautionary measure and in case of intensive use, we recommend periodically checking (every 6 months) on the
state of the electric wire connected to the motor, that the chain and belt tension is right, the tightness of the nuts and the proper
oiling of the sliding points between fixed and mobile parts.
All checks must be recorded (in a dedicated record-book).
9 Maintenance
In its premises, CAME CANCELLI AUTOMATICI S.p.A. implements an Environmental Management System certified in
compliance with the UNI EN ISO 14001 standard to ensure environmental protection.
Please continue our efforts to protect the environment—which CAME considers one of the cardinal elements in the development
of its operational and market strategies—simply by observing brief recommendations as regards disposal:
DISPOSAL OF PACKAGING
– The packaging components (cardboard, plastic, etc.) are all classifiable as solid urban waste
products and may be disposed of easily, keeping in mind recycling possibilities.
Prior to disposal, it is always advisable to check specific regulations in force in the place of installation.
PLEASE DISPOSE OF PROPERLY!
PRODUCT DISPOSAL
Our products are made up of various types of materials. Most of them (aluminium, plastics, iron,
electrical wires, etc.) may be disposed of in normal garbage collection bins and can be recycled by disposing of in specifi c recycla-
ble material collection bins and disposal in authorized centres.
Other components (electrical boards, remote control batteries, etc.), however, may contain polluting substances.
They should therefore be removed and given to qualified service companies for proper disposal.
Prior to disposal, it is always advisable to check specific regulations in force in the place of disposal.
PLEASE DISPOSE OF PROPERLY!
10 Demolition and disposal
MALFUNCTIONS REFERENCES CHECKS
The automation does not open nor close 1-2-3 1 - Deactivate the maintained action by using the dipswitch
The automation opens but does not close 4-10-23 2 - Check the power supply and the line fuses
The automation closes but does not open 5-23 3 - The safety contacts (1-2) and the opening run-limiter
micro switch (N.C.) are open
The automation does not automatically close 9-10-11 4 - The safety contacts (2-C1) and the opening run-limiter
micro switch (N.C.) are open
The remote control does not work 1-12-14 5 - The safety contacts closing run-limiter micro switch (N.C.)
are open
The automation exerts too much force 16 6 - Deactivate the obstruction detection function using the
dip-switches
The automation exerts too little force 16-17-23-24 9 - Activate function “automatic closing”
The automation inverts the direction of movement 16-17-23-24 10 - Check the proper direction of motion
Only one remote control works 18 11 - N.C. command button instead of N.O.
The photocell does not work 4-19 12 - Check the fuse bridge on AF43S, remove/put power back on
The led indicator flashes quickly 3-4 14 - Memorise the radio code again
The led indicator stays on 11 16 - Ad just the sensitivity using the TRIMMER SENS
The automation does not work with the emer-
gency batteries 6-21-22 17 - Eliminating mechanical friction
The automation inverts the direction of move-
ment at the end of the cycle 10-17-23 18 - Insert (or duplicate) the same code in all the remote controls
The automation starts slowly 17-23-24 19 - Check the proper functioning of the photocell
21 - Check the batteries
22 - Respect the polarity of the photocells and accessories
23 - Checking the balancing of the overhead door
24 - Checking the tension of the belt/chain