Hydrotech 5600 SXT User Programming Chart - Manual (Page 6)

8/7/08
FILTERS
Model 5600 SXT-User Programming Chart
Time of Day
FROM SERVICE MODE:-
•
To set Time of the Day push and hold or button for 5 seconds
(*Not both Up and Down Buttons)
Display is TD (Time of Display) → → → → Press
or button to adjust the
display time.
Press Extra Cycle button to resume normal operation
Model 5600 SXT -User Programming Chart
FROM SERVICE MODE:-
• To set user programming push and hold and buttons for 5
seconds, and the time of day is NOT set to 12:01 PM.
Display is DO (DAY OVERRIDE) → → → → [factory default setting: OFF]. Press UP/DOWN
buttons to adjust the setting.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Display is RT (REGENRATION TIME) ([default: 11:00 P.M.]. Press UP/DOWN buttons
to adjust the time.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Display is RC (FIXED RESERVE CAPACITY) [Fixed reserve capacity in gallons default:
0]. Press UP/DOWN buttons to adjust the value.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Display is CD (CURRENT DAY OF THE WEEK). Press UP/DOWN buttons to adjust the
current day of the week. ONLY AVAILABLE IF DAY OF THE WEEK CONTROL IS
ON IN MASTER PROGRAAMING
UP DOWN
UP DOWN
Extra Cycle
Button
Extra Cycle
Button
UP DOWN
Extra Cycle
Button