Hydrotech 5600 SXT User Programming Chart - Manual (Page 5)

Model 5600 SXT-Diagnostics Chart
To enter the diagnostic mode, push and hold and button for 5 seconds.
Display is FR (CURRENT FLOW RATE)→ → → → display current flow rate in gallons per minutes.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is PF (PEAK FLOW RATE)→ → → → display peak flow rate in gallons per unit since the last
regeneration cycle.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is HR (HOURS IN SERVICE)→ → → → display to view the hours in service since the last
regeneration cycle.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is VU (VOLUME USED) → → → →display the volume in gallons used since the last
regeneration cycle.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Display is RC (RESERVE CAPACITY)→ → → →display the reserve capacity in gallons.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Display is SV (SOFTWARE VERSION)→ → → →display the software version
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
End of Diagnostics
UP
Extra Cycle
Button
UP
Extra Cycle
Button
UP
UP
UP
UP