HOMA Conversion Kit For Installation Of HOMA GRP Pump On 2,5 Myers Rail Systems - Manual (Page 2)

Publication
88PN3030A
Please Contact Technical Support At 203-736-8890 With Any Additional Questions
Please Be Prepared To Provide Pump Serial Number During Call
Page
2 of 2
• Insert the clevis pin through the hole in the support column and under the
handle.
• Secure the clevis pin with the cotter pin. Do not forget to bend over the
ends of the cotter pin to keep it from falling out.
• Tighten the locking cap with a wrench taking up any slack.
• Tighten the two existing locking screws in the Myers upper bracket against
the support column. This will ensure proper support of the pump.