Burkert Type 8030 User Manual

Page 2

attention

Warns against a possible risk.
• Failure to observe this warning can result in substantial

or minor injuries.

note

Warns against material damage.
• Failure to observe this warning may result in damage

to the device or system.

Indicates additional information, advice or
important recommendations.

Refers to information contained in this manual or in
other documents.

→

Indicates a procedure to be carried out.

Definition of the word "device"

The word "device" used within this manual refers to the
flowmeter type 8030 HT (high temperature).

English

2. inTenDeD use

use of the device that does not comply with the
instructions could present risks to people, nearby
installations and the environment.
• The 8030 HT flowmeter is intended exclusively to

measure flow rate in liquids.

• This device must be protected against electromagne-

tic interference, ultraviolet rays and, when installed

outdoors, the effects of climatic conditions.

• This device must be used in compliance with the

characteristics and commissioning and use conditions

specified in the contractual documents and in the user

manual.

• Requirements for the safe and proper operation of the

device are proper transport, storage and installation,

as well as careful operation and maintenance.

• Only use the device as intended.

• Observe any existing restraints when the device is

exported.

English

3. bAsic sAfeTy informATion

This safety information does not take into account:
• any contingencies or occurences that may arise during

installation, use and maintenance of the devices.

• the local safety regulations that the operator must ensure

the staff in charge of installation and maintenance observe.

danger due to high pressure in the installation.
danger due to electrical voltage.
danger due to high temperatures of the fluid.
danger due to the nature of the fluid.

various dangerous situations
• Prevent any unintentional power supply switch-on.
• Ensure that installation and maintenance work are

carried out by qualified, authorised personnel in

possession of the appropriate tools.

English

various dangerous situations
• Guarantee a set or controlled restarting of the pro-

cess, after a power supply interruption.

• Use the device only if in perfect working order and

in compliance with the instructions provided in the

instruction manual.

• Observe the general technical rules when installing

and using the device.

• Do not use this device in explosive atmospheres.
• Do not use the device for the measurement of gas flow

rates.

• Do not use fluid that is incompatible with the materials

the device is made of.

• Do not use this device in an environment incompatible

with the materials it is made of.

• Do not subject the device to mechanical loads (e.g. by

placing objects on top of it or by using it as a step).

• Do not make any external or internal modifications to

the device.

English