Burkert Type 8645 - Manual (Page 8)

8
EXPANDING A VALVE TERMINAL
By snapping out the three locking pins, the following
module is released and can be removed without
difficulty.
Releasing the following module Fig. 4:
Step 3:
Remove the cover module parallel to the side.
→
The interface to expand the valve terminal is now
free.
Removing the cover module Fig. 5:
Step 4:
If more modules are to be removed, repeat steps
→
1-3.
Ensure that an FE rail on the upper side of the ter-
minal is detached. Also the modules to be removed
must be detached from the wall or top hat rail.
Removing more modules Fig. 6:
english
Type 8645