beautypg.com

Software installation for windows nt, Installing the pcmcia dvd-rom under windows nt – EXP Computer DVD Station User Manual

Page 15

background image

- 16 -

SOFTWARE INSTALLATION FOR WINDOWS NT

Make sure of the following before you begin:

Windows NT must be version 3.51 or higher.

Since Windows NT does not support the “Hot Insert/Remove” feature,
the PCMCIA DVD-ROM should be connected with your computer
prior to starting Windows NT. Likewise, do not remove the PCMCIA
DVD-ROM before you shut down Windows NT.

In Windows NT, the I/O and IRQ settings of PCMCIA DVD-ROM
cannot be changed. Therefore, if the settings conflict with other devices
you are using, change the I/O or IRQ of other device to avoid conflicts.

Currently, there is no DVD software decoder for Windows NT. The
DVD-ROM will read data that is DVD-ROM or CD-ROM.

Installing the PCMCIA DVD-ROM under Windows NT

In Windows NT 4.0, go to the Start menu and select Settings. Then click
on the Control Panel folder. Once the Control Panel appears, double-click
on the SCSI Adapter icon.

Click the Drivers tab, and the figure illustrated below will be displayed.