EXP Computer DVD Station - Manual (Page 12)

- 13 -
Windows 95 (Older Versions)
The following dialog will appear if you are using the PCMCIA DVD-ROM
under Windows 95 for the very first time and your Windows 95 is version
4.00.950 or 4.00.950a.
(If the dialog box does not appear and the DVD-ROM folder cannot be
found in My Computer, please refer to the section entitled, “Enabling 32-
bit Card Support.”)
Referring to the display above, select Driver from disk provided by
hardware manufacturer and click the OK button. Windows 95 will then
prompt you to insert the manufacture’s installation disk. Insert the PCMCIA
DVD-ROM device driver disk into your floppy drive. Specify the directory
as A:\ (or A:\ win95) and select OK. All the remaining installation
procedures will then finish automatically.
Note: It is not necessary to connect the PCMICA DVD-ROM every time
you reboot your computer; connect only when you need to use it.