EXP Computer CD Station - Manual (Page 14)

- 15 -
Installing 32-bit Card Support
Note: The following procedures apply to the notebook that has install or re-
install the original release of the Windows 95 version 4.00.950 or
4.00.950a.
Your system should be ready for the PCMCIA socket support prior to
operating the PCMCIA CD-ROM. To check whether your computer has the
PCMCIA Socket supported, double-click on the System icon from the
Control Panel folder. (You can find the Control Panel folder by going to
the Start menu. Under the Start menu, select Settings. Under Settings you
can select the Control Panel folder).
Click on the Device Manager tab. If an “x” appears next to PCIC or
compatible PCMCIA Controller item, as shown above, it means the
PCMCIA device driver is not using 32-bit Card Support.
Double-click on the PCIC or compatible PCMCIA Controller item, and a
dialog box will be displayed, as shown on the next page. Place a check mark
next to the current configuration in the Device usage box, then select OK.