EXP Computer CD-820_CDG-820 - Manual (Page 33)

In this case, double click on the PCMCIA Controller, and a dialog box will be
displayed as below. Please place a check mark next to the current configuration of
the Device usage box, and then select OK.
After the PCMCIA 32-Bit Card support is installed, Windows will then ask you to
reboot your computer. You should now refer to the first section in the manual
entitled “Software Installation For Windows 95” to configure the CD-ROM and
Game Port.
If the PCMCIA Socket is not found, then you must first add a PCMCIA socket to
your system. Please click on the “Add New Hardware” icon in the Control Panel
folder and select “PCMCIA socket”. Select the appropriate type of PCMCIA
Controller that matches yours and follow the on-screen instructions.