EXP Computer CD-820_CDG-820 - Manual (Page 28)

APPENDIX B
The following procedures will allow you to use the device in a pure MS-DOS
environment for those applications that will not run in Windows 95
An MS-DOS mode icon is set up with a separate config.sys and autoexec.bat which
will be run when the icon is used.
The requirements are that your system’s PCMCIA controller has to be INTEL
(PCIC) and compatible or the DOS PCMCIA socket drivers(contact your notebook
manufacturer) are loaded before the EXP device DOS drivers.
If above requirements are met, please proceed with the following:
•
Click on the right
mouse button onto
the desktop’s empty
area
•
Go to “New”, then
choose “Shortcut”
•
Type in at the Command line - "C:\WINDOWS\COMMAND"
•
Click on "Next"