EXP Computer CD-820_CDG-820 - Manual (Page 17)

SOFTWARE INSTALLATION FOR WINDOWS 95
The following dialog box will appear when you are using the CD-ROM+ card
under Windows 95 for the very first time.
If the dialog box does not appear, either you have to remove the old driver installed
before or the PCMCIA driver is not activated, please refer to the section titled
“Enabling 32-Bit Card Support” or “Removing and Reinstalling the Driver”.
Select “Driver from disk provided by hardware manufacturer” and click on the OK
button, Windows 95 will then prompt you to insert the manufacturer’s installation
disk. Insert the device driver disk into your floppy drive. Specify the directory as
A:\ or B:\, whichever drive contains the diskette and select OK.