EXP Computer CD-RW Station - Manual (Page 3)

INTRODUCTION
The CD ReWriter is a portable CD-ROM drive, which consists of a low-
power CD rewritable drive, a small 26 pin universal connector, a cable for
Parallel port (printer port),. It is compatible with either computer’s Parallel
Port or PC CARD (PCMCIA) 2.1 Type II or I slot. The CD Rewriter can write
to CD-R (write-once) or CD-RW (rewritable) disk and read other variety of
CD formats. The drive required an external power supply adapter (included).
CD ReWriter dual connection gives user flexibility to add more storage
space or transfer data between your notebook and/or your desktop
computer.
SYSTEM REQUIREMENTS
• Notebook or desktop computer with Pentium 133 Mhz or higher
•
32 MB RAM
•
75 MB free HD space
• A Parallel port (EPP or bi-directional) or If using the PC Card interface,
the computer should have at least one PC Card (PCMCIA) 2.1 slot.
•
Windows 95/98, Windows NT 4.0
§ Suitable for the following disk standard: CD R/RW, CD- DA, CD-ROM,
CD-I, C—ROM XA, CD-Bridge, Photo CD, Video CD, CD Extra
§ Power source: AC Adapter
Input: 120-240 VAC 50-60 Hz 0.4 A.
Output: 12 VDC 1000 mA.
§ CD-RW and CD-R disc and application software included.
PACKAGE CONTENTS
1. Parallel Port interface cable
Standard 25 pin Parallel port connector and 26 pin small connector.
2. CD drive assembly
CD drive with the power indicator, a DC input jack
3. AC Adapter
Input: 100-240 VAC, 50-60 Hz. 0.4A.
Output: +12 VDC/1000mA.
4. Blank CD-RW and CD-R disk
5. PC Card
3
1 4 2
5