EXP Computer CD-420_CD-421_CD-621_CD-821 - Manual (Page 25)

- - 20
USE CD-421 TO INSTALL OS/2 WARP
Before you begin, make a back up copy of the “Diskette for CD-ROM #1”
of OS/2 Warp.
1. Copy EXPCD2.FLT file from A:\OS2WARP to the Diskette for CD-
ROM #1. (You may copy EXPCD2.FLT to harddisk, then copy it to
the “Diskette for CD-ROM #1”).
2. Edit CONFIG.SYS file of the “Diskette for CD-ROM #1” by adding
the following line to the BOTTOM of the file,
BASEDEV=EXPCD2.FLT /P:1 /I:15
4. Insert “OS/2 WARP Installation Diskette” into drive A.
5. Restart your computer.
6. Follow the on-screen instruction to remove the “Installation Diskette”
from drive A and insert “Diskette for CD-ROM #1”. Then press
Enter.
7. The screen will prompt you to insert OS/2 CD into the CD-ROM
drive, then press Enter.
8. Follow the on-screen instructions to proceed with the installation.
When the OS/2 Installation is completed, you will be prompted to
shut down and restart your computer.