EXP Computer CD-420_CD-421_CD-621_CD-821 - Manual (Page 23)

- - 18
ADDING PCMCIA SUPPORT
PCMCIA Support can be automatically installed during OS/2 installation
or it can be installed through Selective Install after OS/2 installation.
To check or install PCMCIA support, perform the following steps:
1. Open OS/2 System.
2. Open System Setup.
3. Open Selective Install.
4. Check if PCMCIA Support has been installed as the System
Configuration window displayed, if yes, you may exit now, otherwise,
perform the following steps to continue.
Figure 12
5. Select the check box to the left of the PCMCIA Support to display
the Select PCMCIA system window.