beautypg.com

Emtek Keypad Leverset Locksets User Manual

Page 5

background image

5

3. Install Outside Trim Plate Assembly

Step 1: While holding Outside Trim Plate Assembly, Press the Plastic Extender (A) into

end of Spindle Shaft (B). The Shaft is properly aligned when the marking ‘TOP’ can be

seen from an overhead view.

Step 2: Position the Outside Trim Plate Assembly through the bore hole.

Step 3: With the Outside Trim Plate Assembly flush to the door, REMOVE the Plastic

Extender.

Feed wire harness

through the bore hole.

THIS SIDE ON TOP.

B

!

!

A

Fit Plastic Extender

through latch.

ONCE POSITIONED,

OUTSIDE TRIM PLATE

ASSEMBLY REQUIRES

SUPPORT.