beautypg.com

Emtek UL Listed Mortise Knob by Knob, Lever by Lever User Manual

Emtek For Home

background image

1. Install Mortise Lock

3. Install Key Cylinder

Installation Guide -

UL Listed Mortise Knob By Knob, Lever By Lever

4. Tighten Key Cylinder

2. Mount Outside and Inside Trim to Door

Tighten knob

with 3/32

hex wrench

(provided).

REV 03-15-2013

IN4-ULMORTLEVKNB

See template for door

prep specifications.

Outside

Outside

Inside

Inside

Inside

5. Install Trim Plate

6. Tighten Inside Lever or Knob

Install key cylinder by

threading it clockwise

on to trim plate.

Trims and knobs/levers will

vary depending on style.

After key cylinder is installed, secure

cylinder by tightening screw with 9/64

hex wrench (provided).

See template for door

jamb prep specifications.

Fasten security strike to door jamb

with #10 x 3 wood screws (provided).

2. Install Dust Box

1. Install Security Strike

3. Install Strike Plate

Face plate can be

adjusted for door

bevel up to 3-1/2 deg.

TIGhTen

Screw

cLOSeST TO

OUTSIde edGe

OF dOOr.

dO nOT Over

TIGhTen.

Outside edge

of door.

dust box slips into

security strike.

#12-24 self

taping screws

(provided).

!