beautypg.com

Emtek Thumb by Lever_Knob User Manual

Emtek For Home

background image

1. Install Mortise Lock

3. Install Key Cylinder

Installation Guide -

UL Mortise Thumb by Lever/ Knob

4. Tighten Key Cylinder

2. Mount Inside and Outside Trim to Door

Tighten lever

with 3/32

hex wrench

(provided).

IN4-ULMORTHBLVKB

REV. 03-15-2013

See template for door

prep specifications.

Outside

Outside

1. Install Security Plate

Inside

Inside

5. Install Trim Plate

6. Tighten Inside Lever or Knob

Install key cylinder by

threading it clockwise

on to trim plate.

Trims and grips will vary

depending on style.

For bottom

grip assembly.

2. Install Dust Box

3. Install Strike Plate

Face plate can be

adjusted for door

bevel up to 3-1/2 deg.

After key cylinder is installed, secure

cylinder by tightening screw with 9/64 hex

wrench (provided).

See template for door

jamb prep specifications.

Fasten security strike to door jamb

with #10 x 3 wood screws (provided).

Dust box slips into

security strike.

#12-24 self

taping screws

(provided).

TIGHTEN

SCREW

CLOSEST TO

OUTSIDE EDGE

OF DOOR.

DO NOT OVER

TIGHTEN.

!

Outside edge

of door.