AEG SCN71800S0 - Manual (Page 25)

Ha
Hb
8 mm
Open the appliance door
and the kitchen furniture
door at an angle of 90°.
Insert the small square
(Hb) into guide (Ha).
Put together the appli-
ance door and the furni-
ture door and mark the
holes.
Ha
K
8 mm
Remove the brackets and
mark a distance of 8 mm
from the outer edge of
the door where the nail
must be fitted (K).
Hb
Place the small square on
the guide again and fix it
with the screws supplied.
Align the kitchen furni-
ture door and the appli-
ance door by adjusting
the part Hb.
Installation 25