Door reversibility – AEG SCN71800S0 User Manual
Page 20
2.
Connect the wire coloured blue to the terminal either marked with the letter “N“ or
coloured black.
3.
Connect the wire coloured brown to the terminal either marked with the “L“ or col-
oured red.
4.
Check that no cut, or stray strands of wire is present and the cord clamp
4
is secure
over the outer sheath.
5.
Make sure the electricity supply voltage is the same as that indicated on the appliance
rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp plug fitted
2
. In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it
is disposed of safely.
Door reversibility
The door of the appliance opens to the right. If you want to open the door to the left, do
these steps before you install the appliance:
• Loosen and remove the upper
pin.
• Remove the upper door.
• Remove the spacer.
S
• Loosen the middle hinge.
• Remove the lower door.
20
Installation