AEG SCN71800S0 - Manual (Page 22)

1
2
Install the appliance in the
niche.
Push the appliance in the
direction of the arrow (1)
until the upper gap cover
stops against the kitchen
furniture.
Push the appliance in the
direction of the arrow (2)
against the cupboard on
the opposite side of the
hinge.
4 mm
44 mm
Adjust the appliance in
the niche.
Make sure that the dis-
tance between the appli-
ance and the cupboard
front-edge is 44 mm.
The lower hinge cover (in
the accessories bag)
makes sure that the dis-
tance between the appli-
ance and the kitchen fur-
niture is correct.
Make sure that the clear-
ance between the appli-
ance and the cupboard is
4 mm.
Open the door. Put the
lower hinge cover in posi-
tion.
I
I
Attach the appliance to
the niche with 4 screws.
22 Installation