AEG SCN71800S0 - Manual (Page 21)

• Loosen and remove the lower
pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
Ventilation requirements
6 cm
min.
200 cm 2
min.
200 cm 2
The airflow behind the appliance must be
sufficient.
Installing the appliance
CAUTION!
Make sure that the mains cable can move freely.
Do these steps.
x
x
If necessary cut the adhe-
sive sealing strip and then
apply it to the appliance
as shown in figure.
Installation 21