eLine Technology SIP-B-R User Manual

Page 15

Web Configuration

4. If your computer has Flash Player installed, the main screen for the

camera web interface opens. From here you can view and configure the

camera.

NOTE: The ActiveX plug-in may provide smoother video performance than

Flash Player. To use ActiveX, click the message above the video window.

Then click inside the video area,

select Install this Add-on for all users on

this computer, and follow the prompts.

Install ActiveX plug-in

NOTE: If your computer does not have Flash Player installed, you will be

prompted to select if you would like to use ActiveX or Flash Player to connect

to the camera:

•

Click to play live video with ActiveX control to reduce latency

(recommended): Uses an ActiveX plug-in to connect to the camera. To

install the plug-in, click on the video area, and select

Install this Add-on

for all users on this computer, and follow the prompts.

•

Click to download the latest version of Flash Player to play live video:

Opens a link to download Flash Player from Adobe’s website. After

completing the installation, restart your browser and reconnect to the

camera.

Select ActiveX or Flash Player

Web Configuration

3. Under Download unsigned ActiveX controls, click Prompt

(recommended) or

Enable.

Select Enable or Prompt under

Download unsigned ActiveX controls

Click OK

4. Click OK. Click OK again to save changes.

Step 2 of 2: Log into camera:

1. Connect the camera to your local network and find the camera’s IP

address. See “4. Finding the Camera’s IP Address” on page 9.

2. Enter the camera’s IP address in the address bar in the following format:

http://

192.168.0.120

IP address

Colon

HTTP port number

NOTE: You can also connect to the camera using a DDNS address (DDNS

setup and port forwarding required; see “5. Configuring Remote

Connection” on page 12 for details).

3. Under User Name and Password, enter the camera’s User Name

(default:

admin) and Password (default: admin) and click Login.

Enter Camera User Name (default:

admin)

Enter Camera Password (default:

admin)

Click Login

eLine Technology

eLineTechnology.com