eLine Technology SIP Web Browser Guide v1.0 - Manual (Page 17)

IPWEB Guide
-16-
2.7.4 Motion Alarm configuration
Note: Before the opening of the record, we must first configure the "Local Record" "Record Policy"
parameter.
Options the camera that need to configure ID number, can be configured to detect movement of the
camera to trigger the alarm when the linkage. Including whether the alarm output and whether or not
such as the opening of PTZ.
First of all, select "Enable Motion Detection", then click on the "Time Setting" set the camera to detect
movement of the deployment time.
eLineTechnology.com