eLine Technology SIP Web Browser Guide v1.0 - Manual (Page 16)

IPWEB Guide
-15-
2.7.2 Disk Alarm configuration
Disk Alert configuration including: disk error alarm and disk full alarm. Disk alarm will be recorded in
the alarm log.
2.7.3 I/O Alarm Linkage configuration
Note: Before the opening of the record, we must first configure the "Local Record" "Record Policy"
parameter.
Options need to configure the alarm I/O of the ID number, can be configured in the Alarm I/O trigger
the alarm when the linkage. Including whether the alarm output and whether or not such as the opening
of PTZ.
First of all, check "Enable IO alarm ", and then click on the "Time Setting" set the I/O warning time of
deployment:
eLineTechnology.com