DE DIETRICH ALEZIO AWHP-V220 - Manual (Page 19)

2. Hold the A key down and press the D key successively to choose
the forcing desired.
Display Back-up
m + d
Forcing additional heating for heating
m + r
Forcing additional heating for DHW
m + d + r
Forcing additional heating for heating and
DHW
The m symbol disappears from
the display Additional heating forcing deactivated
4.3.5. Hybrid operating mode
CAUTION
The hybrid operating mode is only available for appliances
with hydraulic back-up.
The appliance offers a choice between several hybrid operating
modes. The modes available offer either optimised energy
consumption according to energy cost, or optimised energy
consumption according to primary energy consumption. Both hybrid
operating modes are available via parameter U1. In optimised
primary energy consumption mode, the control system chooses the
generator that consumes the least primary energy. In optimised
energy cost mode, the control system chooses the cheapest
generator according to the coefficient of performance of the heat
pump and according to energy cost.
To access the parameters:
1. Go to the Installer menu .
¼See chapter: "Accessing the menus", page 13
2. The symbol  flashes.
Press the key D (®) to enter the "Installer" menu.
3. Use the B (-)+ and *2 keys to switch from one parameter to
another.
4. Use the B (-) and *2 keys to change the parameter value.
Press the ® key to confirm the setting.
To modify another parameter, repeat the procedure from
step 3.
5. Press the key A (G) to exit the menu.
M K
! "
"
"
SERVICE
L
0
0
0
3
2
4
-A
A C D
.
E
D
B
M K
! "
"
"
SERVICE
L
0
0
0
3
2
5
-A
A B C D
.
E
D
M003105-A
AWHP-V220 4. Operating the appliance
23/04/2013 - 300026802-001-03 18