Asus P4T-F - Manual (Page 58)

ASUS P4T-F User’s Manual 58
4. BIOS SETUP
4. BIOS SETUP
4.4 Advanced Menu
Advanced
Menu
CPU Internal Frequency [Manual]
When the motherboard is set to JumperFree™ mode, this field allows you
to select the internal frequency of your CPU. Select [Manual] if you want
to make changes to the subsequent 2 fields. Note that selecting a frequency
higher than the CPU manufacturer recommends may cause the system to
hang or crash.
CPU Frequency Multiple [14.0x]
This field automatically sets the frequency multiple between the CPU’s
internal frequency (CPU speed) and the external frequency. Set this field
in conjunction with the CPU Front Side Bus Frequency (MHz) to match
the speed of the CPU. Configuration options: [10x] [11x]...[19x] [20x]
CPU/Front Side Bus Frequency (MHz) (if CPU Speed set to [Manual])
This feature tells the clock generator which frequency to send to the
system bus and PCI bus. The bus frequency (external frequency)
multiplied by the bus multiple equals the CPU speed. Configuration ranges
from 100/33 to 227/57.
CPU Vcore [1.700V]
This field determines the range of core voltage available to the Central
Processing Unit. Configuration options: [1.850] [1.825] [1.800] [1.775]
[1.750] [1.725] [1.700]
RDRAM Turbo Mode [Disabled]
This feature enables the RDRAM Turbo feature. Select to improve system
performance. BIOS will optimize the RDRAM timing register.
Configuration options: [Disabled] [Enabled]