beautypg.com

Installing the printer, Setting up the printer – Datamax-O'Neil VMP SERIES User Guide User Manual

Page 5

background image

VMP SERIES OF PRINTERS USER'S GUIDE

2

Installing the Printer

For information on installing the printer, see the

VMP

Installation Guide

, which is accessible from

www.datamax-oneil.com.

Setting Up the Printer

The printer mounts to a wall or surface with the

optional dashmount bracket assemblies. For installation

instructions, refer to the instruction sheet supplied with

the accessory or go to www.datamax-oneil.com.
1. After mounting the printer, connect the cigarette

lighter adapter cable or power cable to the

connector with the white tag (Figure 1a and 1b).

2. Plug the cigarette lighter adapter or power cable

into your vehicle's cigarette outlet or power source.

3. If required, connect the communications cable to a

host device.

Note: (For US/Canada) Please only use the Datamax-

O’Neil part number 220180-100 power supply with this

product.

Figure 1a

Communications

cable

Figure 1b

Power cable