Datamax-O'Neil PrintPAD CN3_4_3e_4e User Guide - Manual (Page 9)

PrintPAD CN3/4 & PrintPAD CN3e/4e USER'S GUIDE
7
Using Bluetooth
Radio printers are configured with default factory settings. To determine your printer's radio configuration, print a
self-test. (For more information, see Printing a Self-Test on page 6 .) If you have multiple printers, configure them
specifically for use in your environment.
For proper system operation, set the following parameters on your printer and host computer:
Bluetooth Parameters

Device Name

Authentication

Bondable

Discoverable

Connectable

Encryption
Contact your network administrator to verify the proper radio settings for your environment.
PrintPAD CN3/4 & PrintPAD CN3e/4e LEDs and Indicators
Power LEDs
Note: The following information applies to printers with Bluetooth capabilities.
Battery Status LED Description Action
Red (solid):
The battery has less than 5% power. • If A/C power is not plugged in, the
printer will soon turn off.
• Charge the battery.
• If A/C power is plugged in, the LED
flashes and charging is in progress.
• None. Wait for the charge LED to turn
green.
Orange (solid):
The battery has less than 25% power. • If A/C power is not plugged in, indicates
the battery charge is low.
• Charge the battery.
• If A/C power is plugged in, the LED
flashes and charging is in progress.
• None. Wait for the charge LED to turn
green.
Green (solid):
The battery is near, or at, full capacity. • If A/C power is not plugged in, the
battery is well charged.
None.
• If A/C power is plugged in, the LED is
solid and charging is complete.
None.
Red to orange flash - fast Battery voltage is too high. Replace battery.
Orange flash - slow Charge has timed out. Restart battery charge (battery may be
bad).
Orange flash - fast Internal code error. Remove the battery, then re-connect A/C
power.
Orange, red, or green flash - fast When the AC adapter is plugged into the
printer's power port, the battery status
LED flashes orange, red, or green
(depending on the battery status LED color
that is initially displayed) to indicate the AC
adapter is plugged in. None.
Power LED
Radio LED
Battery Status LED