Datamax-O'Neil microFlash 4t User Guide - Manual (Page 11)

MICROFLASH 4T PRINTER USER'S GUIDE
8
Using 802.11b/Bluetooth
Radio printers are configured with default factory
settings. To determine your printer's radio
configuration, print a self-test. (For more information,
see Printing a Self-Test on page 7 .) If you have multiple
printers, configure them specifically for use in your
environment.
For proper system operation, set the following
parameters on your printer and host computer:
802.11b Parameters

ESS ID

IP Address (if not DHCP)

DHCP

Sub Net Mask

WEP Encryption

Port

Network Type
Bluetooth Parameters

Device Name

Authentication

Bondable

Discoverable

Connectable

Encryption
For information on setting parameters, see Configuring
the Printer on page 7 . Contact your network
administrator to verify the proper radio settings for your
environment.
Note: The following information applies to printers
with 802.11b/Bluetooth capabilities.