Datamax-O'Neil LP3 Hand Strap Clip Replacement Kit User Manual
Datamax-O'Neil Printers

LP3 Hand Strap Clip Replacement
Kit
(220260-000)
Use the LP3 Hand Strap Clip Replacement Kit for
replacing the male snaps and the split rings on LP3
printers.
The LP3 Hand Strap Clip Replacement Kit comes with
the following parts:
•
Male Snaps (2) (part # 280294-000)
•
Split Rings (2) (part # 370213-000)
Replacing the Male Snaps / Split
Rings
It is suggested that the hand strap be removed before
replacing the male snaps or the split rings.
Removing the Hand Strap
1. Remove the hand strap from the LP3 printer by
pressing both of its tabs at the same time, and then
gently pulling the hand strap away from the male
snap.
2. You can now choose to remove either the male
snap, the split ring, or both.
Replacing a Male Snap
1. Make sure the hand strap is removed.
2. Remove the male snap from the split ring by
inserting an item, such as a flathead screwdriver or
a coin, into the split ring.
3. Slide the male snap along the split ring and
continue until the male snap is removed.
4. Slide the new male snap on until it is secure.
5. Reattach the hand strap.
Male Snaps (2)
Split Rings (2)
Male Snap
Tabs
- MF8I 270 User Guide (20 pages)
- MF8I Installation Guide (18 pages)
- MF8I Truck Mount Cable (2 pages)
- MF8I Locking Mounting Bracket (2 pages)
- MF8I Economy Mounting Bracket (2 pages)
- MF8I AN-15 (Line Printer and Easy Print Modes) (7 pages)
- MF8I AN-16 (Single Byte Character Set Font File Format) (8 pages)
- MF8I Quick Reference Programming Guide (72 pages)
- MF8I Configuration Program Installation (1 page)
- MF8I Bluetooth Management Component for Wavelink Avalanche (10 pages)
- A-Class Mark II Operator’s Manual (160 pages)
- A-Class Mark II Installation (2 pages)
- A-Class Mark II DMXrfNetIII (16 pages)
- A-Class Mark II DMXrfNetII (16 pages)
- A-Class Mark II RFID Quick Start Guide (6 pages)
- A-Class Mark II Programmer’s Manual (334 pages)
- ANDES 3 User Guide (32 pages)
- ANDES 3 Quick Start Guide (2 pages)
- ANDES Series Programmer’s Manual (67 pages)
- APEX 2 User Guide (28 pages)
- APEX 2 Quick Start Guide (2 pages)
- APEX 3 User Guide (27 pages)
- APEX 3 Quick Start Guide (2 pages)
- APEX 4 User Guide (30 pages)
- APEX 4 Quick Start Guide (2 pages)
- E-Class Mark III Operator’s Manual (90 pages)
- E-Class Mark III 4xxxxxxx Operator’s Manual (58 pages)
- E-Class Mark III 3xxxxxxx Operator’s Manual (58 pages)
- E-Class Mark III Paper Menu (7 pages)
- E-Class Mark III DPL Programmer’s Manual (296 pages)
- E-Class Mark III Printhead Bracket and Screw Upgrade (11 pages)
- H-Class Operator’s Manual (180 pages)
- Static brush (2 pages)
- H-Class Media Retainer (1 page)
- H-Class Thermal Transfer Option (12 pages)
- H-Class RFID Option (8 pages)
- H-Class Powered Internal Rewind Option (10 pages)
- H-Class Internal Rewind Option (6 pages)
- H-Class Present Sensor Option (8 pages)
- H-Class Peel & Present Option (8 pages)
- H-Class Linear Scanner Option (26 pages)
- H-Class HD Peel & Present Option (10 pages)
- H-Class HD Cutter Option (12 pages)
- H-Class GPIO Option (14 pages)
- H-Class Cutter Option (10 pages)