Step 3: setup and configuration – Datamax-O'Neil I-Class GPIO Multi-Expansion Option User Manual
Page 5
3
PARALLEL PORT B:
NOT INSTALLED
NIC ADAPTER:
IP ADDRESS
010.012.000.215
SUBNET MASK
255.255.000.000
GATEWAY
010.012.254.254
SNMPTRAP DESTINATION
000.000.000.000
NETWARE
ENABLED
DHCP
DISABLED
HOST SETTINGS:
HOST TIMEOUT
10 SEC
PRESENT ADJUST
64 DOTS
PRINTER OPTIONS
MODULES
A: NOT INSTALLED
B: NOT INSTALLED
D: FORMATTED
F: FORMATTED
G: NOT INSTALLED
X: NOT INSTALLED
Y: FORMATTED
Z: FORMATTED
PRESENT SENSOR
NOT INSTALLED
CUTTER
NOT INSTALLED
SCANNER:
MODE
PICKET FENCE
Memory Modules can be
verified on the
Configuration Label.
Step 3: Setup and Configuration
The GPI/O Multi-Expansion CCA has the following features and can be configured according to your
needs (unless otherwise noted, reference the Operator’s Manual for additional setup information, or
consult your software package for usage details):
Flash Expansion – 8 megabytes of configurable Flash Memory for storage of label formats, fonts,
and graphics. (Note that when ILPC Fonts are installed, four Mbytes will remain for other storage
uses.)
Expansion Module Designator
Memory Allocation
F
4 MB Flash – Configurable.
Z
4 MB Flash –ILPC Option – protected, if installed.
You can view available memory by printing a Configuration Label: Press the TEST Key. Then, using
the FWD Key, scroll to PRINT CONFIGURATION and press the TEST Key again.
The printer’s menu system (under PRINTER OPTIONS / MODULES) offers a complete compliment
of memory management functions (PRINT DIRECTORY, PRINT FILE, FORMAT MODULE, DELETE
FILE, and PACK MODULE), while the SYSTEM SETTINGS menu branch lets you define the default
storage module.
Real Time Clock – Allows time and date retention for label time-stamping functions. You can set the
printer’s time and date using the SYSTEM SETTINGS menu branch.
When set, the time and date will be retained and then displayed
upon subsequent power-ups.
READY
STOP
ERROR
REV
FWD
ENT