Datamax-O'Neil E-Class Mark III 3xxxxxxx Operator’s Manual - Manual (Page 54)

48 Appendix B – Ethernet Setup
Wired Ethernet Configuration Page
DHCP
DHCP Controls IP Address discovery, where:
• Enabled: Broadcasts over the network to receive addresses from the responsible
server at startup. Manual modifications to IP Address, Subnet Mask, or Gateway are
not allowed; and, if no server is found, the specified static value will be used.
• Disabled: Uses the stored static IP, Subnet Mask, and / or Gateway Address.
Static IP Settings
Printer IP Address
These are the static address the printer will use when DHCP is set to disabled or a valid
IP could not be retrieved from a DHCP server.
Printer Subnet Mask
Printer Gateway
Ethernet Port
Connection Settings
Duplex Capability Allows the User to specify the line duplex and speed of the wired Ethernet connection.
• Auto-Negotiate (default) • 10 BaseT Full Duplex
• 100 BaseT Full Duplex • 10 BaseT Half Duplex
• 100 BaseT Half Duplex
Advertise Capability Selects the method in which the Duplex Capability setting is advertised, where:
• Automatic (advertises the selected Duplex Capability setting)
• All Capabilities (advertises all capabilities)