Datamax-O'Neil MF8I 270 User Guide - Manual (Page 8)

MF8i 270 PRINTER USER'S GUIDE
5
Installing Paper
1. Open the two latches on the side of the printer’s
cover and lift the printer’s cover to the fully open
position.
2. Depress the locking lever (green knob) to open the
print mechanism (Figure 6).
3. Flip open the print mechanism and verify the center
guide is centered.
4. Lift the two tractor feed clips.
5. Fold the stack of paper in half with the short sides
together and with the top of the form coming out
from the inside fold (Figure 7).
6. Place the paper into the paper cavity with the
bottom edges under the paper lip in the bottom of
the cavity (Figure 8).
Note: Remove the orange label from the locking lever
(green knob).
Figure 6
Figure 7
Figure 8