Printing a self-test, Setting top of form, Tearing the paper – Datamax-O'Neil MF8I 270 User Guide User Manual

Page 10: Rmation, see, Setting

MF8i 270 PRINTER USER'S GUIDE

Printing a Self-Test

1. Turn the printer off by pressing Button 1 and Button

2 simultaneously.

2. Press and hold Button 1. After printing begins,

release Button 1.

Setting Top of Form

1. Press Button 1 to turn on the printer.
2. Position the paper by pressing Button 1 until the end

of the paper is at the edge of the case, for easy tear

up or tear down. If necessary, press Button 2 to

back feed the paper.

3. Turn the printer off by pressing buttons 1 and 2

simultaneously (Figure 11).

4. Press Button 1 to turn on the printer. The top of form

is automatically set.

Tearing the Paper

1. Set the paper to top of form. For more information,

see

2. Grab one side of the paper at a leading edge and

pull up. Once the paper has started tearing at the

perforation, finish with a swift pull upward and

away.

Figure 11