Datamax-O'Neil MF8I Installation Guide - Manual (Page 5)

3
Mounting Options
Datamax-O’Neil MF8i Installation Guide
Mounting Options
To mount the MF8i 270 printer, Datamax-O’Neil recommends using the MF8i Economy
Mounting Bracket (P/N 220142-000) or the MF8i Locking Mounting Bracket (P/N 220152-
000). To obtain information about the mounting brackets, contact your salesperson or call
(949) 458-0500.
Mounting Requirements for the MF8i 270 Printer
1 Before mounting the MF8i 270 printer, review the MF8i Economy Mounting Bracket
(part # 110078-xxx) or MF8i Locking Mounting Bracket (part # 110089-xxx) instruc-
tion sheets.
2 The MF8i 270 printer can only be mounted based on the angles shown below.
Mounting the printer outside of these angles results in the printer jamming.
3 When possible, secure the hardware to the metal bulkhead or to internal metal vehicle
components.
4 Use only #8-32 82° flat head machine screws to mount the brackets with Loctite
(contact Loctite for applicable installation information).
MF8i Economy Mounting Bracket MF8i Locking Mounting Bracket
(Part # 220142-000) (Part # 220152-000)
15° 0°