Triggering during the idle state, Triggering during the readout state – ALLIED Vision Technologies Bigeye G-1100 Cool User Manual
Page 47
Camera interfaces
Bigeye G Technical Manual V2.1.0
47
•
The start of exposure must always correspond with the interline time if
Readout is true.
•
Exposure start delay equals the Readout time minus the registered expo-
sure time.
Triggering during the idle state
For applications requiring the shortest possible trigger latency and the smallest
possible trigger jitter the user trigger signal should be applied when Imaging is
false and Idle is true.
Triggering during the readout state
For applications requiring the fastest triggering cycle time such that the camera
image sensor is exposing and reading out simultaneously:
Take care that the user trigger signal is applied as soon as a valid trigger ready
is detected.
In this case, trigger latency and trigger jitter can be up to 1 line time since expo-
sure must always begin on an interline boundary.