ALLIED Vision Technologies Bigeye G-1100 Cool - Manual (Page 15)

Specifications
Bigeye G Technical Manual V2.1.0
15
Specifications
Bigeye G-132B Cool / Bigeye G-132B NIR Cool
Note

The warranty becomes void in case of unauthorized tampering
or any modifications not approved by the manufacturer.
Caution

Surge
To avoid damage caused by surge, connect the camera to an
AC/DC power supply. Use a certified industrial power supply
that complies with common industrial standards. Make sure
the polarization of the power supply is correct.
During the camera start-up, inrush currents ≥4 A can occur for
20 ms. Use a sufficiently dimensioned power supply to avoid
damage to the camera.
For the DC signal, use cable lengths less than 30 m. Consider
that the voltage drop increases with the cable length.
AVT (or your local dealer) provides suitable power supplies:
http://www.alliedvisiontec.com/emea/products/
accessories.html