Delta Controls 2HT User Manual

Page 13

002522-2HT 180210.doc

PHYSICAL SPECIFICATIONS

Electrical connections :-

Female M20 x 1.5 or Female ½

" NPT

Process Connection :-

½ " NPT External, G ½ " A to ISO 228 or
High Pressure Cone and Thread ("Autoclave")

Process Wetted Parts :-

Below 10 Bar 316 St. St. inlet and Diaphragm
316 St. St. inlet with 17-4PH or 15-5PH Diaphragm
as standard; Monel and Hastelloy available.

Non- Wetted Parts :-

Lower body, Case & Lid :- 316 Stainless Steel
Mounting Hardware :-

316 Stainless Steel

Protection :-

IP 66

Mounting :-

Direct process mounting as standard.
On 50 mm dia. ( 2" ) pipe using mounting bracket kit.
Wall mounting with kit.

Weight :-

1.6 kg ( 3.5 lb) Blind Instrument
Display, add 200 grams ( 0.44 lb )

Dimensions are

Approximate

WEATHERPROOF

Models A2HT, R2HT, F2HT, 42HT

The instruments have been tested for dust and water penetration to EN 60529 and have been rated
IP66 with cover in place and conduit entry suitably sealed. Third party test report for water available on
request.

In addition, the instruments, when fitted with the built-in D-CAL configurator, meet IP54 requirements,
enabling configuration to be performed under damp conditions. DO NOT LEAVE INSTRUMENTS
OPEN UNNECESSARILY!

96mm

PROCESS ENTRY

1/2" NPT EXT. OR AS

SPECIFIED

60mm

DIAMETER

95mm

DIAMETER

ELECTRICAL ENTRY
M20 x 1.5 INT. OR AS

SPECIFIED