CHIEF KTA320_325 - Manual (Page 3)

Installation Instructions Models: KTA-220/225 and KTA-320/325
3
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdriver
• 3/16" Hex Key
• 5/32" Hex Key
NOTE: Other tools may be required depending on your
method of installation.
Parts
Unpack carton and verify kit contents . Read installation
instructions completely. If any listed parts are missing,
contact Chief Customer Service.
Table 1: Parts
ITEM DESCRIPTION QTY*
10 ARRAY ASSEMBLY, KTA-220/225 1
20 ARRAY ASSEMBLY, KTA-320/325 1
30 SCREW, Phillips Pan Head, M4 x 12mm 4
40 SCREW, Phillips Pan Head, M4 x 20mm 4
50 SCREW, Phillips Pan Head, M4 x 30mm 4
60 SPACER, Nylon, 3/8" (used with item 40) 4
70 SPACER, Nylon, 3/4" (used with item 50) 4
80 KEY, Hex, 5/32" 1
90 BRACKET, Pole Clamp, Back 1
100 SCREW, Button Head, 1/4-20 x3/4" 2
110 WASHER, Flat. 1/4" 2
* Quantity varies depending upon the number of displays being
mounted.
Figure 1: PARTS
10
20
30 50
60
70
80
40
110
90
100