CHIEF PAC200 User Manual
Ppc to ppd adapter model: pac-200
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8809-000035 RevA
2007 Chief Manufacturing
12/07
BEFORE YOU BEGIN
PPC TO PPD ADAPTER
Model: PAC-200
Specifications:
•
Designed for installation on Chief PPC Cart.
NOTE: The PAC-200 re-uses certain components and
hardware from the original single display PPC
configuration.
•
Infinite tilt adjustment between 0° and 7.5°.
PAC-200
(Shown installed on PPC cart, purchased separately)
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed
using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in
serious personal injury, damage to equipment, or voiding of factory warranty.
•
If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.