CHIEF K1D Series - Manual (Page 13)

Installation Instructions K1D Series
13
5. The monitor may be adjusted 90 degrees in either direction
in order to provide a portrait view of the monitor. (See Figure
19)
6. Use 3/16” hex key (K) to adjust rotational adjustment screw
to adjust rotational tension. (See Figure 19)
7. The monitor may be adjusted 90 degrees in either direction
in order to provide a portrait view of the monitor. (See Figure
19)
8. Use 3/16” hex key (K) to adjust rotational adjustment screw
to adjust rotational tension. (See Figure 19)
Figure 19
Adjustments - K1D22H ONLY
Display Adjustments
1. Loosen knobs securing faceplates to array. (See Figure 20)
2. Slide displays laterally on array to adjust lateral shift. (See
Figure 20)
3. Adjust pitch and pivot position as desired. (See Figure 20)
4. Tighten knobs to secure faceplates in position. (See Figure
20)
Figure 20
Array Bar Roll Adjustment
1. Loosen roll adjustment screws on back of array bracket.
(See Figure 21)
2. Adjust roll of array bar as desired. (See Figure 21)
3. Tighten roll adjustment screws on back of array bracket.
(See Figure 21)
Figure 21
pitch
pivot point
tension
tension
5
1
3
portrait tension
2
3
2
1 4
3
3
3
1 3
2
2