CHIEF CM2C40 - Manual (Page 21)

Installation Instructions CM2C40
21
Other Dry Contact Options
Extend Retract with Single Switch
Using 9 pin Connector. (See figure 30) and (See figure 32)
Figure 32
J1
Pin 1 Isolated Extend/Retract Input (+)
Pin 2 Isolated Extend/Retract Input (-)
Pin 3 Isolated Voltage Sense Input (+)
Pin 4 Isolated Voltage Sense Input (-)
Pin 5 24V DC Supply Out (150ma Max.)
Pin 6 Ground
Pin 7 RS485 Ref.
Pin 8 RS485 (+)
Pin 9 RS485 (-)
J2
Pin 1 Not Used
Pin 2 Not Used
Pin 3 Not Used
Pin 4 Not Used
Pin 5 Move Extend Terminal Input
Pin 6 Move Retract Terminal Input
Pin 7 Ground
Pin 8 Extend Error Input
Pin 9 Retract Error Input
Pin 10 Ground
Pin 11 Extend Limit Out
Pin 12 Extend Limit Out Return
Pin 13 Retract Limit Out
Pin14 Retract Limit Out Return