CHIEF FSB018BLK User Manual

Flat screen table stand, Fsb-018

I N S T A L L A T I O N I N S T R U C T I O N S

Chief Manufacturing, a products division

of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

P: 800.582.6480 / 952.894.6280 F: 877.894.6918 952.894.6918

8804-002002 Rev00

Duchossois Group Company

04/09

FSB-018

FLAT SCREEN TABLE STAND

The Flat Screen Table Stand is designed to attach directly to VESA FDMI standard 75mm or
100mm mounting pattern.

(1) FSB-018 Stand Assembly

(4) M4 x 10mm Phillips Head Screw

(1) 75mm Adapter Bracket

(4) M4 x 6mm Phillips Head Screw

(1) 100mm Adapter Bracket

(4) 10-24 Nylock Nut

(4) 10-24 x 3/8” Phillips Head Screw

Unpack and check contents: Inspect the Flat Screen Table Stand carefully for shipping damage.

If any damage is apparent, call your carrier claims agent.

CAUTION:

The maximum weight to be installed on the FSB018 is 20 lbs (9 kg).

Do not

use a power screwdriver to install screws. Use a hand screwdriver to
prevent damage to your monitor.

NOTE: For 75mm VESA mounting, perform Step 1 first. For 100mm VESA mounting, perform

Step 2 and Step 3 first.

For 75mm VESA Mounting Pattern

1. Secure the 75mm adapter bracket to your monitor using four M4 x 6mm Phillips head screws

(provided) (see Figure 2).

For 100mm VESA Mounting Pattern

2. Install 100mm adapter bracket using four provided M4 x 6mm or M4 x 10 Phillips head

screws (see Figure 3).

3. Secure the 100mm adapter bracket to the 75mm adapter bracket (see Figure 4).

Figure 1